|
Hermetically sealed connectors manufactured to:
| MIL-C-5015 |
MS3142HS, MS3142HT, MS3143HS, MS3143HT |
| MIL-C-38999 Series I |
MS27470Y, MS27471Y |
| MIL-C-38999 Series II |
MS27476Y, MS27477Y, MS27478Y |
| MIL-C-38999 Series III |
D38999/21, D38999/23, D38999/25, D38999/27 |
| MIL-C-26500 Types “B” and “T” |
MS24265H-B, MS24265H-T |
| MIL-C-83723 Series 3 |
M83723/79, M83723/80, M83723/81, M83723/88, M83723/89, M83723/90, M83723/93, M83723/94 |
| MIL-C-26482 Series I and II |
MS3113H, MS3114H, MS3440H, MS3443H, MS3449H |
These hermetically sealed connectors were developed for applications where a controlled atmosphere such as inert gases, partial vacuums, or constant environments is needed.
Typical applications include aerospace, electronic, electrical power, and control circuits.
|
 |
MIL-C-5015 - as defined by MS33678, these connectors are hermetically sealed with individual compression glass seals around each contact to prevent air leakage in excess of 0.10 micron cubic foot per hour at one atmosphere. All connectors are steel shells with nickel-iron alloy contacts and a final coat of tin plate. Standard connectors are supplied with either solder cup or eyelet type terminations. All connectors meet the instrumentation voltage, salt spray, shock and vibration requirements of MIL-C-5015.
Both military and commercial versions are available.
 Request for Quote
Download Datasheet/Drawing |
|
 |
MIL-C-38999 Series I, II and III - Hermetically sealed with individual compression glass seals around each contact to prevent air leakage in excess of 0.10 micron cubic foot per hour at one atmosphere. All connectors are manufactured with conductive finishes to provide electrical continuity between mated halves prior to contact engagement. Standard connectors are supplied with either solder cup or eyelet type terminations. All connectors meet the instrumentation voltage, salt spray, shock and vibration requirements of MIL-C-38999.
Both military and commercial versions are available.
Request for Quote
Download Datasheet/Drawing [ Series I, Series II, Series III ] |
|
 |
MIL-C-26500 Types “B” and “T” - Hermetically sealed with an all glass seal to prevent air leakage in excess of 1x10-7 cc/sec of helium at one atmosphere. All connectors have a bayonet coupling mechanism or the threaded coupling type. Standard connectors are supplied with either solder cup or eyelet type terminations. All connectors meet the intermateability requirements of MIL-C-26500 types B and T. Both series are supplied with interfacial seals and O-rings.
Both military and commercial versions are available.
Request for Quote
Download Datasheet/Drawing |
|
 |
MIL-C-83723 Series 3 - Hermetically sealed with a single compression glass seal around all contacts to prevent air leakage in excess of 1x10-7 cc/sec of helium at one atmosphere. All connectors have a bayonet coupling mechanism or the threaded coupling type. Standard connectors are supplied with either solder cup or eyelet type terminations. All connectors meet the intermateability requirements of MIL-C-83723 Series 3 types B and T. Both series are supplied with interfacial seals and O-rings.
Both military and commercial versions are available.
Request for Quote
Download Datasheet/Drawing |
|
 |
MIL-C-26482 Series I and II - Hermetically sealed with a single compression glass seal around all contacts to prevent air leakage in excess of 1x10-6 cc/sec of helium at one atmosphere. Standard connectors are supplied with either solder cup or eyelet type terminations. All connectors meet the intermateability requirements of MIL-C-26482 Series 1 and 2. Both series are supplied with interfacial gaskets and peripheral seals. Series 1 can be supplied with O-rings. Series 2 are supplied with raised seal barriers around each contact.
Both military and commercial versions are available.
Request for Quote
Download Datasheet/Drawing |
|
